noxyde, fillcoat, peganox, pegarust, anti-corrosion, rust protection, Australia
Fillcoat is a waterproofing product that everyone should have at home, because it allows you to seal leaks quickly and easily even when weather conditions are bad.
In addition Fillcoat can be applied to countless different materials and surfaces, such as roofing, felt, bitumen, asphalt, hard PVC, polyester, zinc, aluminium, glass, tiles, etc.
Fillcoat is thus perfectly suited for rapid repairs of all leaks in roofs, gutters, ridge-peices, around chimney stacks and outlet pipes.
Specific Characteristics
Instant waterproofing, up to 1300% elasticity, high resistance against weather conditionsand mineral acids (not resistant against solvents), contains no bituminouos ingredients, outstanding adhesion to countless different types of surface
Application
Simple, even in humid conditions. Roller/brush/squeegee/spatul/trowel: apply undiluted.
Airless: dilute with 20-30% Thinner 22, nozzle18-26, apply in two layers.
Additional Information
Finish: satin
Colours: light grey
Precautions:Fillcoat is flammable
Coverage: 1 to 2.5 litres per square meter
Packaging: 1 and 5 litres
Maintenance: clean tools with thinners
Attention: never use on polystirene insulation, flexible PVC, or on new concrete. Also consult our technical data sheet.
Possible Finishing
After a drying time (20°C) of a minimum of 7 days, Fillcoat can be painted over in another colour of Pegarust or Noxyde
Instant waterproofing, up to 1300% elasticity, high resistance against weather conditionsand mineral acids (not resistant against solvents), contains no bituminouos ingredients, outstanding adhesion to countless different types of surface
Application
Simple, even in humid conditions. Roller/brush/squeegee/spatul/trowel: apply undiluted.
Airless: dilute with 20-30% Thinner 22, nozzle18-26, apply in two layers.
Additional Information
Finish: satin
Colours: light grey
Precautions:Fillcoat is flammable
Coverage: 1 to 2.5 litres per square meter
Packaging: 1 and 5 litres
Maintenance: clean tools with thinners
Attention: never use on polystirene insulation, flexible PVC, or on new concrete. Also consult our technical data sheet.
Possible Finishing
After a drying time (20°C) of a minimum of 7 days, Fillcoat can be painted over in another colour of Pegarust or Noxyde
